Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer
Auf Lager

IP67 Outdoor Gigabit PoE Passthrough Switch, 1 PoE in 4 PoE Out Extender, IEEE802.3af/at/bt PoE Powered 90W, 10/100/1000Mbps Ethernet, Metal Wall Mount Waterproof Plug and Play

Kostenloser Versand ab 25,99€
89,99€ -57%

38,99€

1.Modell:Ip67 1 In 1 Out


Info zu diesem Artikel

  • Gigabit-PoE-Passthrough: Enthält 1 PoE-Eingang, 4 PoE-Out-Gigabit-Ports, 10/100/1000 Mbps automatische Anpassungsrate. Angetrieben durch PoE-Netzwerk, keine AC-Stromversorgung erforderlich. Unterstützt auch DC44-57V Max180W Stromeingang und bietet Phoenix-Terminal-Stromschnittstelle für flexiblere Stromversorgung.
  • IEEE 802.3 af/at/bt: Unterstützt Standard-PoE, Eingang max. 120 W (IEEE802.3af/at/bt), Out1 Max 90 W (IEEE802.3af/at/bt), Out2-4 Max 30 W (IEEE802.3af/at). PoE-Spannung 44-57 Vdc PoE Pin:Input/Out1:1/2 (+), 3/6 (-), 4/5(+), 7/8(-);Out2-4:1/2 (+), 3/6 (-)
  • Wetterfest für den Außenbereich IP67: Industriequalität Aluminium-Druckgusskörper, wasserdichtes Nylongelenk, Kabelschnittstelle alle in der Schale geschützt, mit besserer Wasserdichtigkeit, staubdicht, schneefester Effekt, besser geeignet für den Außenbereich, auch geeignet für komplexe Innenumgebungen, wie Lagerhallen, Computerräume, Garagen, Dachböden usw.
  • Plug & Play: Unterstützt Stromerkennung erkennt Geräte automatisch, einfach das Ethernet-Kabel einstecken, direkt mit dem Gerät verbinden, LED-Anzeige des Port-Status, ohne Konfiguration. *Bitte beachten Sie, dass 24 V passives PoE nicht unterstützt wird.
  • Einfache Installation: Unterstützt Wandhalterung, kleinere Größe, platzsparend, LED-Anzeigen zeigen deutlich den Portstatus an, geeignet für viele Positionen. Unterstützt 3-stufige Kaskadierung, kann Poe AP, Kamera, Telefon und andere POE-Geräte verbinden, Extender POE-Abdeckung zu niedrigen Kosten in einer Vielzahl von komplexen Umgebungen


IP67 Outdoor Gigabit PoE Passthrough Switch, 1 PoE in 4 PoE Out Extender, IEEE802.3af/at/bt PoE Powered 90W, 10/100/1000Mbps Ethernet, Metal Wall Mount Waterproof Plug and Play


Jerry AGUIAR
Bewertet in Frankreich am 7. Juni 2025
Parfait
user-M4Q9H8
Bewertet in Saudi-Arabien am 22. Januar 2025
Good sturdy design but the glands doesn't cover the rj45 connector! Port 2,3&4 doesn't support a camera which requires more than 30 watts and keeps reconnecting attached cameras! May be i need to use the DC port to use port 1
Michael Nelson
Bewertet in Großbritannien am 7. Oktober 2024
This is a great product, definitely designed to withstand use in an outdoor environment.I am using this with UniFi gear and it is just plug and play. Powered using 802.3BT from a US8 switch lite - fired up right away. The LED’s on the top confirm BT (Red) or AT/AF (Green) which is handy.Plugged in my G5 bullet camera and AC Mesh outdoor AP and everything works perfectly.Now for the quirks. I used this with pre-terminated Ethernet cables with jackets and the connectors that came with the switch were barely long enough to fit over the jacket. Not sure if it was the brand of cable (CSL) but it was a bit of a fight getting the gland to fit tightly, not helped by using flat Ethernet cables I will admit.Port one outputs more POE voltage than ports 2,3 and 4 so if you have a device that draws a lot of power, worth making sure it connects to port one.Also, if you’re not using the DC power supply, you need to unscrew the small green section that sticks out before you can fit the blank end to keep the unit water tight. Doesn’t mention this anywhere in the instructions!Finally, this was only supplied with three blanks so worth bearing in mind if you don’t intend on using every port. I had just enough to cover the DC power outlet and ports 3 & 4.All in all, despite the quirks, a decent product. Very easy to use and get set up and the build quality is solid. Much cheaper than the UniFi solution that needs its own cabinet to keep out the rain.
Craig L.
Bewertet in den USA am19. Oktober 2024
I plan to install an Ethernet cable that may be over 300ft after routing inside the buildings. I bought this product to extend the cable and have tested it. It works perfectly, smartly and safely. I am using this to extend my business network between two buildings and not for just cameras. The throughput checked out at a full 1gbp/s and the network worked properly. I connected both POE and non-POE devices. The unit detected the POE status and applied power when needed and remained off for non-POE devices. During power up the POE output light will flash but does not apply POE output until it detects a POE device is connected protecting non-POE devices. It is weatherproof and well designed. I recommend this for anyone who needs to extend an Ethernet connection.

Das könnte Ihnen auch gefallen