Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer
Auf Lager

EDISION HDMI Modulator Xtend, HDMI auf DVB-T, HDMI LOOP, RF LOOP, Steurung Infrarot-Signale über Koaxial Kabel, PLUG and PLAY, Full HD, HDTV, DVB-T, MPEG4, USB, Pre-Config Funktion

Kostenloser Versand ab 25,99€
144,29€ -52%

68,99€

  • ✔ Wandelt ein Bildsignal welches über HDMI anliegt in ein DVB-T Signal. Welches mit einem DVB-T/T2 Gerät (z. B. Fernseher, Receiver usw. ) empfangbar ist.
  • ✔ ein Bildsignal welches über HDMI anliegt (z. B. von einem Digitalreceiver, Sat-Receiver, BluRay Player, DVD Player, PC, Überwachungskamera, Notebook, etc) kann so sehr einfach und günstig an verschieden Fernseher übertragen werden.
  • ✔ eignet sich für Verteilsysteme wie Hotels, Supermärkte, Wettbüros, Sportcafes, Bars, Restaurants, Fitness Studios, Krankenhäuser oder Heimanwender die Ihre Überwachungskamera in das vorhandene Verteilnetz einspeisen möchten.
  • ✔ unterstützt Full-HD 1080p mit Top DVB-T Messwerten
  • ✔ Ein absolutes Highlight stellt das integrierte EDIRx Infrarot Steuerungssystem dar. Hiermit kann das Infrarot-Signal von einem zweiten TV-Gerät aus gesteuert werden.



Produktbeschreibung des Herstellers

HDMI MOUDULATOR Xtend

HDMI MODULATOR Xtend

HDMI Modulator DVB-T mit integrierter IR-Steuerung und HDMI Durchschleif-Funktion!

HDMI MODULATOR Xtend

HDMI MODULATOR Xtend Verpackungsinhalt
Verpackungsinhalt
  • HDMI Modulator Xtend
  • Jack zu IR Tx Kabel
  • Netzteil 5V/2.0A EU/UK
  • IR-Steuerung EDI-Rx
  • Jack zu IR Rx Kabel
  • USB zu DC (5V) Kabel
  • Bedienungsanleitung

HDMI MODULATOR Xtend

EDISION HDMI auf DVB-T RF Modulator (IR, HDMI LOOP, RF IN, RF OUT, MPEG4, PLUG & PLAY)

Der HDMI Modulator Xtend mit integrierter IR-Steuerung und HDMI Durchschleif-Funktion ist äußerst flexibel und kann HDMI Signale wie z.B. von Sat-Receivern, PCs, Notebooks, Überwachungskameras, DVD/Blu-ray Player auf DVB-T/MPEG4 konvertieren. Das Eingangssignal bleibt vollständig erhalten und gleichzeitig über die HDMI Durchschleif-Funktion wird die HDMI-Quelle am Hauptfernsehgerät in Echtzeit angezeigt. Mit dem IR-Steuerungssystem EDI-Rx kann das Infrarot-Signal am zweiten TV gesteuert werden.

  • Full-HD 1080p HDMI Eingang
  • Full-HD 1080p RF DVB-T MPEG-4 Ausgang
  • HDMI LOOP Durchschleif Unterstützung
  • Integrierte IR-Steuerung EDI-Rx
  • RF IN Durchschleif Unterstützung
  • RF-Ausgang in allen VHF- & UHF-Kanälen
  • Bequeme Programmierung über LED Display
  • Schnelle Konfiguration, Plug & Play

Hauptmerkmale

IR Steuerung

Integrierte IR-Steuerung

Das IR-Steuerungssystem EDI-Rx bietet Ihnen die Möglichkeit, die Infrarot-Signale Ihrer Audio/Video-Quelle an ein weiteren TV über die vorhandene RF-Netzwerk Installation zu steuern. Bitte beachten Sie, dass der HDMI Modulator Xtend Voraussetzung der Hauptinstallation ist.

HDMI LOOP

HDMI Durchschleif-Funktion

Der HDMI Modulator Xtend mit der HDMI LOOP Durchschleif-Funktion ist äußerst flexibel, das Eingangssignal HDMI bleibt vollständig erhalten und gleichzeitig über die HDMI Durchschleif-Funktion wird die HDMI-Quelle am Hauptfernsehgerät in Echtzeit angezeigt.

LED Display

LED Display

Mit dem praktischen LED Display können Sie die wichtigsten Parameter manuell einstellen. Die Kanalnummer in DVB-T und das Ausgangslevel in dbμV lassen sich sehr einfach über die Tasten des HDMI Modulators einstellen. Natürlich können Sie auch weitere Einstellungen mithilfe eines USB-Sticks und der Config-Funktion sehr leicht über dem PC verändern.

FULL HD

Überall HDTV

Der HDMI Modulator Xtend eignet sich somit hervorragend für Heimanwender die Ihre Überwachungskamera oder ein Sat-Receiver in das vorhandene Verteilnetz einspeisen möchten. Full-HD 1080p Bildqualität zum Genießen!

Installationsbeispiel

Installationsbeispiel

Mühelos Ihre HDMI quelle in Ihren privaten Verteilsystem einspeisen und mit dem IR-Steuerungssystem EDI-Rx Infrarot-Signale am zweiten TV steuern.


Cliente
Bewertet in Spanien am 8. Januar 2024
Lo he utilizado para pasar la señal de un decodificador por la antena de casa y así poder sintonizarlo por todas las teles que tengo en casa. Y evitar tener que poner un deco en cada tele. La señal es muy buena. Ahora veo los canales TDT + otro canal para el deco.
Arbakel
Bewertet in Deutschland am 8. Januar 2023
When you are transcoding video from devices (Nvidia Shield TV, ...) supporting "rich audio format" passthrough like Dolby Digital(+) or Dolby Atmos even make sure to change the audio format to STEREO as Modulator is not capable to transcode the complex audio format to Stereo on it's own.As a side note, if you wish to split the HDMI signal from the source device to both TV and modulator, using Edision device solely for PIP (picture in picture) TV capability as I did, I recommend using FeinTech VSP01204 HDMI Splitter Ultra HD 4K 60Hz HDR with Scaler - or similar available on AMAZON. When using a splitter and modulator you should count with a significant delay (0.5 - 1s) in source device responsiveness - which is understandable.The source HDMI signal refresh rate supported by splitter is 60Hz where this particular splitter is capable to automatically divide the source to 4k 60Hz and 1080p 60Hz branches. Modulator will convert 1080p 60Hz to it's native 1080p 24 - 30 Hz automatically as far as I understand it.For playing a TV over a game on Xbox/PS and/or web browsing in PIP mode is stupendous! I love it.
Marios Charalambous
Bewertet in Deutschland am 24. Juni 2023
The product is excellent. I bought another brand a few years ago which was very disappointing. The quality of the image of Edision is excellent. Real HD image without noise on the picture. It is as the tv is connected directly to the receiver.
ray
Bewertet in Deutschland am 13. Februar 2022
Converting a hdmi from a freesat box into coax which is fed around the house. Excellent quality hdmi now available all over house. Also have terrestrial ariel looped through as well. Excellent product, easy to set up. Wish I could turn of the led's on box though that's a small gripe
Phillip Hoseason-Smith
Bewertet in Australien am 6. Juni 2021
Contacted manufacturer, anf folloowed instructions, but I could not to get it to work. Not a plug and play item
pm6p
Bewertet in Italien am 6. Dezember 2021
si istalla in un attimo e converte in segnale hdmi in maniera ottima con un bitrate di circa 17 mb.il segnale arriva in chiaro a ogni sintonizzatore terrestre e tv consentendo quindi una registrazione hd senza vincoli hdcp. unica nota negativa è che lcn usato di default è il numero 1 e quindi sostituisce rai uno. si può modificare ma per ragioni ignote con lcn diverso il segnale va risintonizzato spesso dopo lo spegnimento della tv( di sicuro è un bug). conviene lasciare lcn1 e poi modificare il numero di canale dalla tv. peccato l'audio solo stereo ma questo era già descritto nelle caratteristiche del prodotto e quindi non è un difetto. ottima l'uscita passante hdmi che evita di acquistare altri aggeggi per sdoppiare il segnale.
Kunde
Bewertet in Deutschland am 19. November 2021
Hallo.Ich bin sehr erfreut über dieses Produkt.Es Arbeitet sehr gut und die Qualität Ton Audio Ausstattung sehr gut.Dieses Produki ist sehr sehr Empfelenswert.Meine Hochachtung.Der Amazon Kunde
REYNAUD GIORGIO
Bewertet in Italien am 13. Juni 2021
Mancano istruzioni in italiano, si trovano in internet. Installazione per esperti in impiantistica TV e gestione modifica file con PC. Risultato dopo installazione buono, video, audio, gestione telecomando con IR tutto ok
Kunde
Bewertet in Deutschland am 13. April 2021
TVB-T ist Tod. Aber mit diesem Modulator bekommt die Funktion im TV wieder einen Sinn.
Thomas
Bewertet in Deutschland am 15. Mai 2020
Super! Dank dieser Box kann jemand alte Geräte problemlos weiterverwenden.
TXOLSA
Bewertet in Spanien am 11. Mai 2020
Ya habia tenido el modelo anterior sin IR, despues de unos 3 años sin ningun problema y buena caludad.Lo que mas me ha llamado la atencion en este modelo es el IR, para desde un 2 tv cambiar de canal etc.MANUAL en inglés, y el como conectar el dispositivo IDir, es confuso.Se agradeceria un esquema de conexiones para no tener que andar interpretando quien es OUT 1 y OUT 2 y sus conexiones con A,B,C,D y cual debe conectarse al TB o al ModuladorAñado:He colocado el IDIr, según se indica en el manual, o eso creo, y la imagen sale pixelada o indica señal debil.Los adaptadores F a coaxial que trae, a mi entender no se ajustan a las indicaciones del manual, cosa extraña, lo que me onduce a pensar que lo conexiono mal.Insisto en mi anteror peticion, pueden mandarme un esquema de dichas conexiones.In saludo